POS-X EVO Laser - Introduction; Caution and Serial Number Labels

2
Caution and Serial Number Labels
Figure 2. Label Location on the Bottom of the Scanner
Caution: To maintain compliance with applicable standards, all circuits connected to
the imager must meet the requirements for SELV (Safety Extra Low Voltage)
according to EN/IEC 60950-1.
To maintain compliance with standard CSA C22.2 No. 60950-1/UL 60950-1
and norm EN/IEC 60950-1, the power source should meet applicable
performance requirements for a limited power source.
Item Number,
Serial Number and
Compliance Information
location.