Posey KeepSafe Essential - Page 26

www.posey.com 1.800.447.6739
KeepSafe Essential
26
MOUNTING
Chair/Wheel Chair Mounting (Continued)
WITH 8269 ALARM ATTACHMENT BRACKET
1. To attach the KeepSafe Essential to a wheelchair using the 8269 Alarm
Attachment Bracket, first wrap the strap around the wheelchair frame
and then attach the buckle, tightening strap securely.
WITH 8278N AND HOOK-AND-LOOP ATTACHMENT
1. To attach the KeepSafe Essential to a wheelchair using the hook-
and-loop strip and chair bracket, wrap the straps firmly around the
wheelchair frame.
8289 WITH SCREW ATTACHMENT TO WHEELCHAIR BACK
1. Choose a location on rear of chair, out of the patient’s/resident’s reach,
where existing chair screws can be removed to mount bracket.
2. Use a screwdriver to remove chair screw.
3. Place flat side of bracket against chair back, with release lever
pointing DOWN.
4. Reinsert screw through the top horizontal slot of bracket and into
chair frame.
5. Use a screwdriver to secure bracket to chair.
6. Slide alarm onto bracket from top down until it is firmly in place.
7. To remove alarm, gently push release lever IN while sliding alarm up
and out.
8. Make sure sensor cables can be secured away from moving parts of
the chair.