Posey KeepSafe Essential - Page 25

www.posey.com 1.800.447.6739
KeepSafe Essential
25
MOUNTING
Wall Mounting (Continued)
MOUNTING WITH 8208G AND 8208H ASSEMBLIES
1. 8208G GCX
®
Alarm Mounting Bracket Assembly is for use with GCX
vertical channel mounts. For installation instruction guide, consult
www.gcx.com.
2. 8208H Modular Services Alarm Mounting Bracket Assembly is for
use with Modular Services Company horizontal headwall channel.
For installation guide consult www.modularservices.com.
Chair/Wheel Chair Mounting
WITH THE 8276 WIRE BRACKET
1. Choose a location on rear of chair, out of the patient’s/resident’s reach.
2. Slide alarm onto bracket from top down until it is firmly in place (Fig.
13 page 22).
3. Choose location on back of chair back where patient/resident cannot
reach or tamper with the alarm or connections.
4. Pull bracket wire away from alarm to create an opening wide enough
to fit the chair back
5. Slide bracket onto chair and push down to ensure a snug fit. Make
sure indicator lights are in clear view of staff.
6. To remove alarm, gently push release lever IN while sliding alarm up
and out (Fig. 14 page 22).
7. Make sure magnet can be secured out of the way and does not
present a tripping hazard.