5.3.1 Function List
1. Connect the USB Charger to the Type-C charging port.
2. The battery is being charged when power indicator starts flashing.
3. Charging is completed when 4 LED indicators are solid on and data cable can be
removed.
Charge
Recharge
mobile phone
When a mobile device is connected, the remote controller automatically charges
devices with a charging ability of 500mA/5V.
Indicator function See 5.3.2
Flight control See 5.2
One-key return
See 7.8
Emergency stop
For any emergency situtaions during the flight, press “Shoot” and “Record” button
for 2s at the same time till the remote controller beeps, the drone will stop running
and fall down.
Shoot
Short press it to shoot one picture
When camera is in video recording mode, short press it
to switch to shoot mode
Record video
Short press it to start/stop video recording
When camera is in shooting mode, shot press it to
switch to video recording mode
Gimbal Dial
Dial it to the right to increase the pitch angle (head up)
Dial it to the left to decrease the pitch angle (head down)
Remote controller
frequency pairing
See 5.3.3
5.3 Function
Low battery
prompt
When power level of the remote controller is lower than 10%, the remote controller
will have a “beep” sound every second.
Auto shutdown
The product will shut down automatically if the remote controller has no connection
and operation for 20mins.
Pause
If the drone is performing a Smart Flight like Circle Flight or auto landing, press
once to make the drone brake and hover in place. Press again to cancel it and
regain the control of the drone.
16
To Next Page
Loading...
