Wider communication angle is ensured at a close
distance in this mode.
Adjust the antenna angle along with the changes of drone height and distance, to ensure the best communication
status of the remote controller.
5.3.3 Remote Controller Function
The ATOM drone and the remote controller can be used immediately after startup since they have been paired
before delivery. Frequency pairing is only required when using a new drone or remote controller for the first time.
Proceed frequency pairing between the drone and the remote controller by tapping "Drone Re-pairing" under
Calibration in App Settings. See 8.5 Remote Controller Calibration for the detailed procedures.
Keep both antennas pointing directly towards the
drone to acquire a longer transmission distance.
When the drone is right above the remote controller, the transmission signal is weakened drastically due
to poor antenna angle. Please lower the flight altitude or fly the drone horizontally for some distance with
the antenna pointing at the drone as much as possible as shown in the picture.
Do not cross the antenna in any case. Do not press the antenna on your mobile device
in any case.
5.4 Antenna Angle
18
To Next Page
Loading...
