4. Flight mode:
9. Settings
Tap to view information about Safety, Calibration, Control, Camera and About.
1. Return button:
2. Navigation prompt bar:
5. Positioning mode:
6. GPS status:
8. Power level of the smart battery:
Normal
Sport
Video
Attitude mode, no positioning
Vision positioning
GPS positioning
Display the strength of video transmission connection
signal between the drone and the remote controller
Tap to return to the homepage
Display drone status and flight mode
7. Signal quality of video transmission:
Display GPS signal status and quantity of satellites
searched
20
Estimated Remaining Flight Time
6.2 Flight Interface
3. Gimbal angle:
Display current gimbal pitch angle
3
7
6 9
20 19
21
22
1 2
18
10
11
12
13
14
16
15
17
5 84
Safety
Switch on/off Beginner Mode: If switched on, the drone will be confined to fly in a cylindrical space with a radius of
30 m and a height of 30 m and restricted to fly only in Video Mode.
Set measurement system (Metric or Imperial) and speed (Video/Normal/Sport)
Set drone behavior when signal lost: Return/Land/Hover
Return —— the drone will automatically ascend to 120 m and return to the HOME point.
Land —— the drone will land on the spot where it loses the signal.
Hover —— the drone will hover in place where it loses the signal.
Switch on/off the Slient Return Mode: If switched on, the remote control will no longer beep when the drone enter
the RTH mode next time. (Shot press the power button of remote control will stop the beep of this time)
Switch on/off the Flight Safety & Tips
Battery information: check the temperature, current, voltage and others of the smart battery.
Calibration
This sector includes compass calibration, gimbal calibration, gimbal fine-tunning, remote controller calibration and
drone re-pairing.
Control
Remote Controller Settings: Tap to switch control stick mode (Mode 1: Left Hand Throttle; Mode 2: Right Hand
Throttle)
Gimbal Settings: Tap to set gimbal maximum pitch speed, gimbal angle (0°/-90°), and to switch between Gimbal
Stable Mode or FPV Mode.