1. Unfold the antenna.
2. Connect your mobile phone to the USB cable.
3. Insert the part of your mobile phone with the USB
cable into the slot of the remote controller.
4. Pull and open the remote controller with both hands
and fix your mobile phone stably.
5. Connect the other end of the USB cable to the
remote controller.
6. Take out the sticks.
7. Screw in both control sticks clockwise.
8. Installation completed.
3.4 Preparing the Drone
The product is delivered under folded status. Please unfold it as follows:
3.5 Preparing the Remote Controller
Installation of mobile phone and control stick
1. Remove the gimbal protector.
2. Unfold the front arm before the rear arm.
3. Unfold the propeller blades.
1
2
3
5
4
6
7
8
07
To Next Page
Loading...
