2.5 Technical Terms
IMU (inertial measurement unit), the most important core sensor of the
drone.
TOF (time of flight), the period from transmission and receiving of
detection infrared signal, in order to determine the target distance.
The sensor system, which lies at the bottom of the drone and consists
of camera and TOF module.
High-accuracy positioning, which is realized through Downward Vision
System.
Identify direction for geomagnetic sensor and the drone.
Atmospheric pressure sensor, which enables the drone to determine
the altitude through atmospheric pressure.
Switch the drone motor from static status to idle running.
Once unlocked, the motor will start spinning at a fixed speed, but it can't
provide sufficient lifting force for the drone to take off.
The drone will return to HOME point automatically based on GPS
positioning.
Position of the drone camera.
Ascend or descend the drone.
Fly the drone to front or back.
Fly the drone to left or right.
Enable self-rotation of the drone to left or right.
IMU
TOF (Time of Flight)
Downward Vision System
Vision Positioning
Compass
Barometer
Lock/unlock
Idling
Auto return
Drone head
Throttle control stick
Pitch control stick
Roll control stick
Yaw control stick
04
To Next Page
Loading...
