Potterton Paramount two - Page 47

Programming
120-393 632.4 04.08 Fh
PARAMOUNT two 30 - 115 kW 47
Re-adjustment room
sensor
(54)
The temperature display of the value, transmitted by the room
sensor, can be corrected under prog. no. 54.
Time programs
Preselection
(500, 520, 540, 560)
Before a time programme is set, the individual days (Mo, Tu, We,
etc.) or day groups (Mo-Su, Mo-Fr, Sa-Su) have to be selected, at
which the time programme has to be activated.
When the set time of a day group is changed, this will automatical-
ly be taken over for all
3 on/off phases in this day group.
Heating phases
(501 to 506, 521 to 526,
541 to 546 and 561 to
566)
Up to three heating phases may be set per heating circuit, which
will be activated on the days, set under the preselection (prog.-
no. 500, 520, 540, 560). In the heating phases, it will be heated at
the set comfort setpoint. Outside the heating phases, it will be he-
ated at the reduced setpoint.
The time programs are only activated in the operation mode “Au-
tomatic“.
Default values
(516, 536, 556, 576)
Setting of the default values given in the setting table
Holiday programs
The heating circuits may be set to a selectable operation level with
the holiday programme during a certain holiday period.
Start
(642, 652)
Entering the holiday start
End
(643, 653)
Input of holiday end
Operation level
(648, 658)
Selection of the operation level (reduced setpoint or frost protec-
tion) for the holiday program
The holiday programmes are only activated in the operation mode
“ Automatic “.
Heating circuits
Comfort setpoint
(710, 1010)
Setting the comfort setpoint
Reduced setpoint
(712, 1012)
Setting the reduced setpoint to reduce the room temperature du-
ring secondary usage times (e.g. at night or when absent).
Frost protection setpoint
(714, 1014)
Setting the frost setpoint, so that a too big decrease of the room
temperature is prevented.
Heating curve slope
(720, 1020)
The flow temperature nominal value is formed with the help of the
heating curve, which is used to control the flow temperature de-
pending on the weather.