ABOUT THIS MANUAL
PURPOSE
This manual contains important instructions for the installation, configuration and use of the electric vehicle
charger Standalone NB 120, which manages the power transformation and main control for the charge.
From now on, this manual refers to Standalone NB 120 with the term “equipment” or “charger”.
Please notice the NB 120 range includes the chargers NB 60 / NB 90 / NB 120.
Power Electronics reserves the right to modify product features.
TARGET AUDIENCE
This manual is intended for qualified customers who will install, configure and operate the NB 120
chargers.
Only qualified technical personnel validated by Power Electronics may install and start up the equipment.
POWER ELECTRONICS CONTACT INFORMATION
Power Electronics USA Inc.
1510 N. Hobson Street, Gilbert,
Phoenix
AZ 85233
UNITED STATES OF AMERICA
US Sales: 602-354-4890 / (480) 519-5977
Fax: (415) 874-3001
Power Electronics España, S.L.
Polígono Industrial Carrases
Ronda del Camp d’Aviació nº 4
46160, Llíria (Valencia)
SPAIN
Tel: (+34) 961 366 557 / Fax: (+34) 961 318 201
Website: www.power-electronics.com
To Next Page
Loading...