PH4000Ri/E Owner’s Manual 12
Serial number and bar code identication and location
The generator bar code number and the engine serial number identify your particular unit and are necessary when
ordering parts and accessories. These two numbers are used by your dealer and DTS Manufacturing for warranty
administration and must be supplied before any work can be done.
Serial
Number
The engine serial number can be found stamped on the engine block near the oil dipstick. It
is visible when the maintenance door is removed.
The BCN number label is found in two locations:
1. On the side of the generator toward the mufer grill, close to the bottom.
2. On the back of this owner’s manual.
You can also nd the BCN number on the foil label on the shipping carton.
Please record this information below and keep this manual in a safe place along with the bill of sale.
Engine Serial Number
Bar Code Number (BCN)
Date of Purchase
Name of Selling Dealership
Please go to www.powerhouse-products.com/register and register your unit today. Online registration will be accepted
as proof of purchase. Online registration will make sure you are protected in the event you have lost your receipt, and will
signicantly speed the process in the event warranty service is necessary.
For warranty assistance:
Phone: 1-877-544-4449
Fax: 1-855-242-8922
E-mail: warranty@powerhouse-products.com
BCN # 100122377055322
To Next Page
Loading...
