Powerhouse PH4000Ri/E - Connecting and Using AC Appliances

PH4000Ri/E Owner’s Manual23
6.10. AC application
• The control panel has three AC breakers: Two (2) 20 A breakers for the 5-20R duplex receptacle,
and one (1) 30 A breaker for the L5-30R twist-lock receptacle. Ensure that the breaker is on for the
receptacle you want to use.
1. Start the engine.
2. Make sure the digital display is illuminated, and returning data.
3. Conrm that the appliance to be used is switched off before plugging into the control panel.
4. Plug the appliance into the control panel.
• Be sure that all appliances are in good working order before connecting them to the generator. If an
appliance begins to operate abnormally, becomes sluggish, or stops suddenly, turn off the generator
engine immediately. Disconnect the appliance and examine it for signs of malfunction.
NOTE
!
IIIIIFUEL
U: 000.0 V
P: 0000 W
T: 000.0 H
I: 00.0 A
CAUTION
!