7
DURING INSTALLATION
▲ 1. Be aware of all moving parts and avoid close proximity to any pinch points.
▲ 2. Disconnect power at the control panel before making any electric service
connections. Connection location for controls and safety equipment can
be found on the wiring diagram, and in this manual.
▲ 3. Know how to operate the manual disconnect mechanism.
▲ 4. Adjust the open and close force adjustment on the control board in each
direction to the minimum force required to operate the gate smoothly. DO
NOT increase the force adjustment setting to makeup for rough
spots in gate travel - FIX THE GATE INSTEAD!
▲ 5. Locate the controls at least 10 feet from the moving gate so that the user
can observe the gate operation, but is not able to come in contact with the
gate while operating the controls.
8
▲ 6. Attach large warning signs provided to each side of gate in the
most conspicuous place. Mount control station and smaller
warning placard together within sight of the gate opening.
W
A
R
N
I
N
G
Moving Gate Can Cause
Serious Injury or Death.
KEEP CLEAR! Gate May Move
at Any Time. Children Should
Not Operate Gate. Operate
Gate Only When Area is in
Sight and Free of People
and Obstructions.
AFTER INSTALLATION
▲ You are responsible for ensuring that the end user understands the
basic operations and safety systems of the unit, including the
location and operation of the manual disconnect.
▲ Point out that the safety instructions in brochure are the
responsibility of the end user, and then LEAVE A COPY OF THIS
BROCHURE WITH THE END USER
To Next Page
Loading...
Need help?
General
