9
END-USER SAFETY WARNINGS
The manufacturer of the gate operator does not know what type of gate you
have, or what type of automatic system is installed on your gate. Be sure you’ve
been fully instructed on the sequence of operation for your specific gate
system(s). Keep the gate properly maintained and have a qualified service
person make repairs.
▲ 1. Be sure the following safety instructions are distributed to all persons
authorized to use your gate.
▲ 2. KEEP GATEWAY CLEAR (Front and Back) AT ALL TIMES. Your
automatic gate is not for pedestrian use. No one should ever cross the
path of the moving gate.
10
▲ 3. DO NOT allow children to play near your gate, or to operate the gate.
▲ 4. DO NOT operate your gate system unless you can see it when the
gate moves.
▲ 5. Be sure a pushbutton or key switch has been installed for manual
electric operation in the event your radio or card does not work. Any
mounted control station should be located a minimum of 10 feet from
the gate so the gate cannot be reached through or touched. Any
pushbutton located in a building should be installed within sight of the
gate.
▲ 6. DO NOT operate any controls without watching the movement of the
gate.
To Next Page
Loading...
Need help?
General
