PowerShield Centurion RT Series - Operating Mode Description

18
www.powershield.com.au
 12: Charger boost voltage setting
Interface
Setting
Parameter 2: Set up the charger boost voltage.
Default: 3.50V/cell. (not adjustable)
 13: Charger float voltage setting
Interface
Setting
Parameter 2: Set up the charger float voltage.
Default: 3.50V/cell. (not adjustable)
 14: LCD display backlight setting
Interface
Setting
Aon: LCD display backlight is on all the time. (Default
setting)
Aut: LCD display backlight will turn off after 60 seconds if no
buttons are pressed.
 00: Exit setting
Interface
Setting
Exit the setting mode.
3-6. Operating Mode Description
Operating mode
Description
LCD display
Online mode
When the input voltage is within acceptable
range, UPS will provide pure and stable AC
power to output. The UPS will also charge the
battery at online mode.
ECO mode
Energy saving mode:
When the input voltage is within voltage
regulation range, UPS will bypass voltage to
output for energy saving. The UPS will also
charge the battery at ECO mode.