PowerShield Centurion RT Series - Warning Indicator

20
www.powershield.com.au
3-8. Warning indicator
Warning
Icon (flashing)
Code
Alarm
Low Battery
Sounding every second
Overload
2 short beeps every 2 seconds
Over input current
Sounding 2 beep every 10 seconds
Battery is not connected
2 short beeps every 2 seconds
Over Charge
Continuously sounding
Site wiring fault
2 short beeps every 2 seconds
EPO enable
2 short beeps every 2 seconds
Over temperature
Continuously sounding
Charger failure
Continuously sounding
Battery fault
Continuously sounding
(At this time, UPS is off to remind
users something wrong with battery)
Out of bypass voltage range
2 short beeps every 2 seconds
Bypass frequency unstable
2 short beeps every 2 seconds
Battery replacement
2 short beeps every 2 seconds
EEPROM error
2 short beeps every 2 seconds
NOTE: “Site Wiring Fault” function can be enabled/disabled via software. Please check
software manual for the details.