INDEX
49
QUATTROCANALI | SERVICE MANUAL
14. Select “Upload” from the following screen:
15. The procedure will take approx. 10 min.
During running procedure the leds condition will change randomly.
After some minute the front leds MAIN, POWER ON and READY must be ON
16. When the procedure is nished you will see the Upgrading bar totally blue colored.
Don’t worry if “Upgrading” is still displayed.
17. Wait 2 minutes and then reboot the amplier.
18. Connect the amplier to ArmoniaPlus and update the rmware to the last version available.
Remember to change again the IP address on your PC as it was before starting the procedure
To Next Page
Loading...
