Page 27
Appendix 3: How to set battery parameters via
WiFi APP
NOTE: This operation requires MP3746 (sold
separately) (eBOx-WIFI-01 WiFi Connection
Module) to be connected to MP3741
Download and install this software：Li-WIFI&BLE
(Android system）
Depending on the Android version you have you
may need the following steps:
On some phones the App may not immediately connect with eBOx-BLE-01 or eBOx-WIFI-
This is because new phones are more sensitive to privacy issues so the APP is often un-
by default. So to use it you may need to set the trust option as follows:
1. Open Settings and click “APPs & notifications” followed by “enter”
To Next Page
Loading...
