PowerTech MP3768 User Manual

21
OPERATION:
SETTINGS
1. Clear the generated energy
In the PV power interface, long press the “ENTER” button until the value
flashes. Then it enters the reset mode; press the “ENTER” button again to
confirm and reset.
2. Switch the battery temperature unit
In the battery temperature interface, long press the “ENTER” button to switch
the unit.
3. Battery type
Supported Battery Types
Lead-acid battery
Sealed(default)
Gel
Flooded
User
Lithium battery
LiFePO4 (4S/8S)
Li(NiCoMn)O2 (3S/6S/7S)
User
Setting the battery type via the LCD
① Sealed
(Default)
② Gel ③ Flooded ④ User
Operation:
On the battery voltage interface, long press the “ENTER” button until the
battery type interface flashes. Then press the “SELECT” button to change the
battery type, and press the “ENTER” button to confirm.

PowerTech MP3768 Specifications

General

Brand	PowerTech
Model	MP3768
Category	Controller
Language	English