PowerTech MP3768 User Manual

22
OPERATION:
Setting the battery type via the PC software or APP software
• PC software
Connect the controller and the PC through the USB to the RS485 converter,
and set the controller’s parameters through the PC software. Please refer to
the cloud platform manual for the specific setting.
• APP software
Connect the controller and the WIFI module or Bluetooth module through
a standard network cable (parallel cable). The mobile phone APP sets the
controller’s parameters through the WIFI signal or the Bluetooth signal. For
the specific setting, please refer to the cloud APP manual.
WiFi Adaptor
Setting the battery parameters via the LCD
Operation:
1. On the battery voltage interface, press and hold the "ENTER" button to
enter the battery type interface.
2. Press the "SELECT" button to change the battery type, such as selecting
the “GEL”; and then press the "ENTER" button to confirm and back to the
battery voltage interface automatically.
3. On the battery voltage interface, press and hold the "ENTER" button to
enter the battery type interface again.
4. Press the "SELECT" button to change the battery type to the “USE”.
Under the "USE" battery type, the battery parameters that can be set via
the "LCD" are shown in the table below:

PowerTech MP3768 Specifications

General

Brand	PowerTech
Model	MP3768
Category	Controller
Language	English