Communication
59
Powerware
®
9155 UPS (8–15 kVA) User’s Guide S 164201553 Rev D www.powerware.com
쑺 Industrial Relay Card (IRC) - is used to indicate the operating status of
the U PS system using the customer’s monitoring equipment. The IRC
uses four isolated normally-open or normally-closed dry relay contacts
to indicate the UPS status. Normal, Bypass, Battery, and Alarm mode
can be monitored.
쑺 Multi-Server Card - has six serial communication ports that can
communicate simultaneously with other computers using LanSafe
Power Management Software (provided on the Powerware Software
Suite CD).
쑺 Modem C ard - provides out-of-band remote notification and
monitoring using modem communication directly to cell phones and
pagers.
쑺 Single-Port Card - connects to the Powerware Expansion Chassis to
enable multiple communication options or to a PC for power
management control.
쑺 ConnectUPS-MX SNMP Card - has Ethernet, modem, and SNMP
capabilities.
쑺 USBCard-connectstoaUSBportonyourcomputer.
SeeFigure32onpage53forthelocationofthetwoX-Slot
communication bays.
Relay Interface Card
Modbus Card
Multi-Server Card
Modem Card
Single-Port Card
ConnectUPS-X Web/SNMP Card
Industrial Relay Card ConnectUPS-MX SNMP Card
USB Card
Figure 38. Optional X-Slot Cards
To Next Page
Loading...
