Precor AMT 800-Series - Preparation and Tools

18 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers
Hardware Kit (not to scale)
The hardware kit shipped with this equipment contains the
fasteners and other hardware components shown in the
following table. Before you begin assembly, make sure that
your hardware kit is complete. If not, please contact Precor
Customer Support.
Fasteners Quantity
Nylon lock nuts
(⁵₁₆-inch)
6
Hex head bolts
(⁵₁₆-inch x 1-inch)
4
Hex head bolts
(⁵₁₆-inch x 3¹₂-inch)
6
Bolt sleeve
(⁵₁₆-inch)
2
Flat washers
(⁵₁₆-inch)
6
Self-tapping screw
(#10 x 1¹₄)
6
Flat head hex drive screws
(¹₄-inch x ⁵₈ -inch)
5
End caps 2
Conduit (Optional) 1