Precor AMT 800-Series User Manual

36 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers
Positioning the Handlebars
To avoid damage in shipment, the ATM is packed with its
handlebars reversed. Two ³₈-inch x 1¹₄-inch set screws are
loosely threaded into the screw holes on each handlebar. The
plastic boots that will cover the screw holes are positioned
just above them on the handlebars.
To position the handlebars for use:
1. Remove the two set screws from one handlebar.
Figure 20: Handlebar set screw removal

Precor AMT 800-Series Specifications

General

Brand	Precor
Model	AMT 800-Series
Category	Fitness Equipment
Language	English