54 Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 883 / 833 / 823
Informational Displays Prior to Shutdown
The equipment saves its battery charge by moving into a
shutdown mode. If the user does not maintain the minimum
rate of motion, a 30-second shutdown process begins.
In this mode, the console displays a countdown indicator and
ignores all keypresses. If no movement is detected or the rate
of motion remains below the minimum, the indicator changes
as the countdown continues.
Note: The user can resume exercising before the countdown
period elapses and the program will continue from the point
at which it was paused.
Important: If the equipment is connected to a CSAFE master
device, it follows a slightly different shutdown process. Ten
seconds before the equipment shuts down, it ends the exercise
session and displays a reset message while it disconnects from the
CSAFE master device. It ignores all keypresses during these last
ten seconds.
Symptoms of a Low Battery
If no one has used the equipment for an extended period of
time, the battery may need recharging.
Symptoms of a low battery include the following:
A flickering or erratic display
Loss of user and program information after the user stops
exercising, without any display of a workout summary or a
notification of pending shutdown
Important: To maintain a constant power source, use the optional
power adapter.
To Next Page
Loading...
Need help?
General
