Treadmill Safety Features 71
Instruct users on how important it is to use the safety clip
while exercising on the treadmill, and demonstrate how they
should attach it to their clothing near the waistline.
If the restart switch trips during exercise, perform the
following steps:
1. Reattach the safety clip if necessary.
2. Press the restart switch down until it clicks, returning it to
its normal position.
Note: If the restart switch trips, all information about the
current workout is deleted.
3. Start the workout from the beginning, reducing the time
as needed to account for the amount of exercise that has
been completed.
Figure 37: Attaching the safety clip
Tip: The small, flexible tab underneath the restart switch is
designed for storage of the safety clip. When the treadmill is
not in use, attach the safety clip to the tab as shown in the
following figure.
Figure 38: Safety clip storage
To Next Page
Loading...
Need help?
General