20
Set High Security Mode timing. (default = 60 seconds)
xxx . xxx = 1 to 255 (seconds).
Enable/Disable Momentary Codes Turn Off Toggle.
(default = disabled)
x . x = for disabled, x = for enabled.
Enable/Disable Series 2 compatibility. (default = disabled)
x . x = for disabled, x = for enabled.
Exit Program Mode.
.
WARRANTY
The manufacturer will replace or repair this product if proven
to be faulty (excluding accidental or malicious damage)
under the 36 month warranty offered from the date of
purchase.
As NIDAC Security Pty. Ltd. or its agents do not perform the
final installation, inspection or training in the use of this
product, they cannot be held liable for injury, loss or damage
directly or consequentially arising from the use or misuse of
this product.
The software design of the NIDAC Presco is protected
internationally. Design improvement and specification
changes are subject to change without notice. All designs
are copyright protected.
To Next Page
