4
EGRS The EGRESS input can take either a normally open
or normally closed switch between EGRESS and
GND. When this input is activated the ELC relay
will come on and remain on for the time that the
EGRESS input is on. Once the EGRESS input is
released the timing set for ELC will begin. The
other selected features of the PAC1 (DOTL, Door
Forced Open & Automatic Relock) will also become
active at this time. Therefore, the EGRESS input
can be used to hold the door open indefinitely with
the use of a toggle switch, or with the use of a
momentary type switch it can be used to release
the door for a set time in the same way that a
momentary user code does.
DLOG Data input/output for connection to an optional
PEL1 event logger or a PACDL when in Series 2
Compatible mode.
To Next Page
Loading...
