128-9316
2 of 16
Page 2
Before You Begin
PROFESSIONAL INSTALLATION IS
STRONGLY RECOMMENDED
Roll down window to avoid locking the keys in the vehicle during installation.
Avoid mounting components or routing wires near hot surfaces or near moving
parts like the steering wheel as it may prevent proper operation of the vehicle.
Tape or loom wires under the hood and dash for protection as well appearance.
Use grommets when routing wires through metal surfaces to prevent chang
and shorting.
Use a Digital Multi Meter for testing and verifying circuits. DO NOT USE
A "TEST LIGHT" OR "COMPUTER SAFE PROBE" as these can set off air
bags or damage sensitive vehicle computers and electronics.
For technical support go to www.avxtech1.com
or call 1 800 225 6074
This device complies with FCC Rules Part 15 Operation is subject to the following two conditions
(1) This device may not cause harmful interference and
(2) This device must accept any interference that may be received, including interference that may cause
undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modi-
cations to this equipment. Such modications could void the user’s authority to operate the equipment
To Next Page
Loading...
