Prestige APS57TM - Page 9

APS57TM_RevA_07/20
9
Detailed Descripons: Setup Opons
Keyless Control (Bank 2) (cont.) See page 15 for Programming Instrucon.
Feature 9: Override Method
This feature is not available on this model.
Feature 8: Horn Output Duraon
Funcon: Set the horn output to acvate for a set me.
Seng Choices:
• Opon 1 - Output pulses for 16 milliseconds.
• Opon 2 - Output pulses for 30 milliseconds.
• Opon 3 - Output pulses for 40 milliseconds.
• Opon 4 - Output pulses for 50 milliseconds.
• Opon 5 - Output pulses for 10 milliseconds.
Feature 17: Security Prole
Funcon: Set the system to funcon as a keyless entry / convenience system or full-featured alarm / convenience
system.
Seng Choices:
• Opon 1 - OFF, no security protecon.
• Opon 2 - OEM Security, entry zone protecon.
• Opon 3 - w/ OEM Remote Start, entry zone protecon with OEM remote start compability.
Feature 10: Driver Priority Unlock
This Feature is not available on this model.
Feature 11: Silent Choice
TM
Funcon: Set audible beeps on or o when arming and disarming the system.
Seng Choices:
• Opon 1 - Pressing Lock or Unlock at any me will perform the funcon with audible beeps.
• Opon 2 - Pressing Lock or Unlock for 1.5sec on remote will control system without an audible beep.
• Opon 3 - First press of Lock or Unlock on the remote control will perform the funcon without an audible
sound. Second press within 10sec will result in audible beeps.
Feature 12: Park Light / Trunk Relay Funcon
This Feature is not available on this model.
Feature 13 - 19: AUX Ch. 4 Output
This Feature is not available on this model.
Feature 14 - 19: AUX Ch. 5 Output
This Feature is not available on this model.
Feature 15 - 19: AUX Ch. 6 Output
This Feature is not available on this model.
Feature 16 - 19: AUX Ch. 7 Output
This Feature is not available on this model.
Feature 18: Data Bus (DBI) Port Protocol
Funcon: Set funconality of the data bus connector to accept integraon modules of diering protocols.
Seng Choices:
• Opon 1 - The data bus connector will be congured to work with modules that use the ADS Protocol.
• Opon 2 - The data bus connector will be congured to work with modules that use the DBI Protocol.