• The power supply of the modules in the cabinet is connected to a circuit breaker that removes
the power if overloading occurs.
• The hot parts of the dosage valves are protected by a transparent, L-shaped plastic sheet.
Shielding on a dosage valve
• Install and use the equipment in accordance with the instructions in the manual to ensure that
the safeguards function correctly.
• Never bridge or remove the safeguards: this may lead to a serious accident.
Residual risks
The following risks could not be excluded in the design:
• If the unit is altered or is used in such a way that it becomes contrary to the instructions in this
manual, unforeseen risks may occur.
• If the pump switch is set to automatic, the process computer can start the pump. Therefore, set
the switch to off during maintenance when the process computer must remain on.
• Because the unit is usually connected to other external electrical equipment the unit has not
been fitted with an emergency stop. The installer must install a separate emergency button near
the unit which can be used to switch off the entire installation.
9NutriJet - user - 00.002
Safety
To Next Page
Loading...