R
Ronald HicksJul 31, 2025
How to turn on Pro-Form 790t?
- MMichael BaldwinJul 31, 2025
First, ensure the power cord is correctly plugged into a surge suppressor, and the surge suppressor is connected to a properly grounded outlet. Use a single-outlet surge suppressor meeting the required specifications. Note that the Pro-Form Treadmill isn't compatible with GFCI-equipped outlets and might not work with AFCI-equipped outlets. Also, make sure the key is inserted into the console after plugging in the power cord. Finally, check the power switch on the treadmill frame near the power cord; if it's tripped (protruding), wait five minutes, then press it back in to reset.