Pro-Form HYBRID TRAINER - Attaching Front Frame Components; Connecting Frame Wiring Harness

8
4
4. Set the Front Frame (23) near the Rear Frame
(1) as shown.
Connect the Lower Wire (45) in the Rear Frame
(1) to the Upper Wire (105) and the Power Wire
(99) in the Front Frame (23).
23
99
45
105
1
3
3. Orient the Front Stabilizer (2) so that the large
holes are facing the Front Frame (23). Attach
the Front Stabilizer to the Front Frame with two
M10 x 65mm Screws (40).
40
23
2
Large
Holes