To Next Page

To Previous Page

THE INFORMATION MODE

The console features an information mode that keeps

track of treadmill usage information. The information

mode also allows you to select miles or kilometers as

the unit of measurement and to turn on and turn off the

display demo mode.

To select the information mode, hold down the Stop

button, insert the key into the console, and then re-

lease the Stop button. When the information mode is

selected, the following information will appear in the

display:

• Thenumber

of hours that

the treadmill

has been

operated.

• Thetotalnumberofkilometersormilesthatthe

walking belt has moved.

• An“E”forEnglishmilesoran“M”formetrickilome-

ters. To change the unit of measurement, press the

Speed increase button.

• A“d” if the demo mode is turned on. The console

features a display demo mode, designed to be used

if the treadmill is displayed in a store. While the

demo mode is turned on, the console will function

normally when you plug in the power cord, press the

power switch into the reset position, and insert the

key into the console. However, when you remove

the key, the displays will remain lit, although the but-

tons will not function. To turn on or turn off the demo

mode, press the Speed decrease button.

To exit the information mode, remove the key from the

console.

Pro-Form performance 650 User Manual

Questions and Answers: