15
H
OW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunc-
tion or break down, earthing provides a path of least
r
esistance for electric current to reduce the risk of elec-
tric shock. This productʼs power cord has an equip-
ment-earthing conductor and an earthing plug.
IMPORTANT: If the power cord is damaged, it must
be replaced with a manufacturer-recommended
power cord.
F
ollow the steps below to plug in the power cord.
1. Plug the indicated end of the power cord into the
socket on the treadmill.
2. Plug the power cord into an appropriate outlet that
is properly installed and earthed in accordance with
all local codes and ordinances.
DANGER: Improper connection of
the equipment-earthing conductor can result
in an increased risk of electric shock. Check
with a qualified electrician or serviceman if
you are in doubt as to whether the product is
properly earthed. Do not modify the plug pro-
vided with the product—if it will not fit the
outlet, have a proper outlet installed by a
qualified electrician.
OPERATION AND ADJUSTMENT
Socket on Treadmill
Outlet
UK
Australia
Outlet
Power Cord
To Next Page
Loading...
Need help?
General