EasyManua.ls Logo

Pro-Form PFTL59721-INT.0 - User Manual

Pro-Form PFTL59721-INT.0
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER’S MANUAL
Model No. PFTL59721-INT.0
Serial No.
Write the serial number in the space
above for reference.
Serial
Number
Decal
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Keep this
manual for future reference.
CUSTOMER SERVICE
UNITED KINGDOM
Call: 0330 123 1045
From Ireland: 053 92 36102
Website: iconsupport.eu
E-mail: csuk@iconeurope.com
Write:
ICON Health & Fitness, Ltd.
Unit 4, Westgate Court
Silkwood Park
OSSETT
WF5 9TT
UNITED KINGDOM
AUSTRALIA
Call: 1800 993 770
E-mail: australiacc@iconfitness.com
Write:
ICON Health & Fitness, Inc.
PO Box 635
WINSTON HILLS NSW 2153
AUSTRALIA
iconeurope.com

Table of Contents

Questions and Answers

  • M
    Michele JohnsonAug 13, 2025
    What to do if Pro-Form PFTL59721-INT.0 power turns off during use?
    • S
      Stephanie NealAug 13, 2025
      If your Pro-Form Treadmill turns off during use, try the following: First, check the power switch and reset it if it has tripped by waiting five minutes and then pressing it back in. Next, ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Also, remove and reinsert the key from the console. If these steps don't resolve the issue, please see the front cover of this manual.
  • J
    Jonathan WilliamsAug 17, 2025
    How to fix Pro-Form PFTL59721-INT.0 when power does not turn on?
    • M
      Melissa MitchellAug 17, 2025
      If your Pro-Form Treadmill power does not turn on, ensure that you are using a suitable extension cord, if needed—specifically, a 3-conductor, 14-gauge (2 mm[2]) cord no longer than 5 ft. (1.5 m). Also, verify that the key is properly inserted into the console. Finally, check the power switch located on the treadmill frame near the power cord; if it's tripped (protruding), wait five minutes and then press it back in to reset it.
  • F
    frederickkendraAug 20, 2025
    Why Pro-Form PFTL59721-INT.0 Treadmill power does not turn on?
    • J
      Jacqueline SmithAug 20, 2025
      If your Pro-Form Treadmill isn't turning on, first ensure the power cord is plugged into a properly earthed outlet, using a suitable extension cord if needed (3-conductor, 14-gauge, no longer than 5 ft.). Also, check that the key is correctly inserted into the console. Finally, examine the power switch on the treadmill frame; if it's tripped (protruding), wait five minutes, then press it back in to reset.
  • P
    pgloverAug 25, 2025
    What to do if Pro-Form PFTL59721-INT.0 Treadmill walking belt slips when walked on?
    • C
      Cameron PerryAug 25, 2025
      If the walking belt on your Pro-Form Treadmill slips when you walk on it, first remove the key and unplug the power cord. Then, use the hex key to turn both idler roller screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered.
  • R
    Robert MoranAug 28, 2025
    How to fix Pro-Form Treadmill walking belt being off-center?
    • S
      Shannon MosleyAug 28, 2025
      To fix an off-center walking belt on your Pro-Form Treadmill, first remove the key and unplug the power cord. If the belt has shifted left, turn the left idler roller screw clockwise 1/2 turn. If it's shifted right, turn the left idler roller screw counterclockwise 1/2 turn. Be careful not to overtighten the belt. Plug the power cord back in, insert the key, and run the treadmill for a few minutes. Repeat this process until the belt is properly aligned.
  • A
    Amy HolderSep 1, 2025
    What to do if Pro-Form Treadmill turns off during use?
    • J
      Joseph OliverSep 1, 2025
      If your Pro-Form Treadmill turns off unexpectedly, start by checking the power switch. Also, ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Another step is to remove and reinsert the key from the console.
  • T
    Toni ButlerSep 4, 2025
    How to recalibrate incline on Pro-Form PFTL59721-INT.0?
    • D
      Danielle BurgessSep 4, 2025
      To recalibrate the incline on your Pro-Form Treadmill, hold down the Stop button and the Speed increase button, insert the key into the console, and then release the Stop button and the Speed increase button. Next, press the Stop button, and then press the Incline increase or decrease button. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system. If the incline system does not begin calibrating, press the Stop button again, and then press the Incline increase or decrease button again. When the incline system is calibrated, remove the key from the console.
  • C
    Carrie CooperSep 8, 2025
    Why does the Pro-Form Treadmill walking belt slow down when I walk on it?
    • C
      coreyhansenSep 8, 2025
      The walking belt may slow down due to several reasons. If the walking belt is off-center, remove the key and unplug the power cord. If the belt has shifted left, turn the left idler roller screw clockwise 1/2 turn; if it shifted right, turn it counterclockwise 1/2 turn. Be careful not to overtighten, then walk on the treadmill for a few minutes to check. If the walking belt slips, unplug the power cord. Use the hex key to turn both idler roller screws clockwise 1/4 turn. Ensure you can lift each edge of the belt 2 to 3 inches off the platform and keep the belt centered. Then, plug in the power cord, insert the key, and test the treadmill.

Pro-Form PFTL59721-INT.0 Specifications

General IconGeneral
BrandPro-Form
ModelPFTL59721-INT.0
CategoryTreadmill
LanguageEnglish

Related product manuals