pro.point 8475006 User Manual

User Manual
8475006
Please read this manual before use.
V 1.6
60 Gallon
Single Stage Stationary
Air Compressor
200-3137-A_10-8-18

pro.point 8475006 Specifications

General

Brand	pro.point
Model	8475006
Category	Air Compressor
Language	English

Summary

Specifications

Introduction

Safety

Hazard Definitions

Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE hazard alerts.

Work Area Safety

Guidelines for maintaining a safe and clean environment during operation.

Personal Safety Precautions

Recommendations for wearing personal protective equipment (PPE) and safe practices.

Specific Safety Precautions

Risk of Bursting

Details on preventing air tank explosions and proper maintenance.

Risk of Explosion or Fire

Addresses ventilation requirements and safe placement to prevent fire hazards.

Risk of Burn

Warnings about touching hot components during and after operation.

Risk from Moving Parts

Safety measures for preventing injury from moving parts like belts and flywheels.

Flying Objects Safety

Precautions regarding debris ejected at high speeds and eye protection.

Risk of Damage to Air Compressor or Property

Guidelines for proper transport, operation, and environmental considerations.

General Safety Precautions

Electrical Safety

Instructions for safe electrical connections and wiring by qualified electricians.

Use and Care of Device

Parts Identification

Basic Air Compressor Components

Overview of the electric motor, TOPS, pump, pressure switch, and tank.

Compressor Controls

Main Power Disconnect

Guidance on installing and using the main power disconnect switch.

Motor Reset Switch

Instructions for resetting the motor after a thermal overload shutdown.

Pressure Switch

Explanation of the pressure switch function and its preset operation.

Pressure Relief Valve

Information on the safety relief valve and its periodic checks.

Tank Pressure Gauge

Description of the tank pressure gauge function and its limitations.

Assembly Guidelines

Electrical Power Requirements

Details on voltage, amperage, and wiring requirements for safe installation.

Main Power Panel Connection

Recommendations for connecting to a dedicated 240V circuit.

Main Power Disconnect Switch Considerations

Guidance on voltage drops and appropriate wire gauge for power supply.

Grounding Instructions

Requirements for connecting the product to a permanent grounding system.

Operation Procedures

Break-In The Pump

Steps for the initial break-in period of the compressor pump.

Pre-Start Checklist

Essential checks to perform before starting the compressor.

Daily Start Up

Shutdown Procedure

Maintenance

Maintenance Schedule

Lubrication

Checking the Oil Level

Procedure for checking the pump oil level using the sight glass.

Changing the Oil

Steps for draining old oil and refilling with new oil.

Belt-Tightening Device

Pulley Alignment

Cleaning the Air Filter

Testing for Leaks

Storage Recommendations

Disposal Guidelines

Troubleshooting Guide

Parts Breakdown Diagram

Compressor Torque Chart

Compressor Parts List

Pump Torque Chart

Pump Assembly Parts List

Kit Parts List

Gauge Torque Chart

Pressure Switch Parts List