English
© 2012 Proceq SA
In addition the alphabetic, numeric and special charac-
ters can be pre-selected with the «CLEAR» key. The
vertical arrow keys ( h / i ) are used to set the required
characters at the current cursor position [ ].
Setting a consecutive number (incrementation) within
the roll identification
A consecutive number can be located anywhere in the
roll identification. A consecutive number is defined as
follows:
• The incremented number always starts with the
character [ : ].
• The end of an incremented number always finishes
with the character [ : ] or a space [ ].
Examples
• Roll identification; example 1: :1423: or :1423
• Roll identification; example 2: :10113:PAA - 2 - FR
• Roll identification; example 3: 123456AQS -
14AZ:009:A123AB
• Roll identification; example 4: A - BETA:0211:
or A - BETA:0211
The bold consecutive numbers are automatically
increased by 1 after each new measurement series/roll.
Each roll identification only permits one single consecu-
tive number!
Additional function of the space [ ]
The space [ ] also has an additional delete function.
All characters to the right of a space [ ] are deleted
when the END or MENU keys are pressed.
2. Electronic input of the roll number with the aid of
a barcode reader.
This electronic input is carried out with a barcode reader.
This option is possible from version SN 511.XXXX and
Eprom version 5.1. The barcode reader is an accessory
and is described in the respective section.
Display option
Press the «MENU» key to return to the main menu
where the «Display Option» menu item can be selected
with the cursor ( Fig. 17 ).
Operation of the devices 11
To Next Page
Loading...
Need help?
General
