HAZARD INTENSITY LEVEL
BLAZER 980073 09/16/02
2-4
The decals should be placed in a prominent spot on
the vehicle where access is given to operate the
unit. The illustrations above suggest the location
and placement of the decals.
When placing the decals, be sure the area is clean
of any dirt and possible wax build-up. Place the
decal by starting at on edge and smoothing the
decal over to the other edge. This will help eliminate
air bubbles and allow the decal to adhere better.
After a time the decals may become damaged or
worn. If they become unreadable, they should be
replaced.
To Next Page
Loading...
