EasyManua.ls Logo

Procom PCNSD18T - User Manual

Procom PCNSD18T
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
VENT
-
FREE GAS
LOG HEATER
MODELS
PCNSD18T
PCNSD24TD
PCNSD24M
WARNING: If the information in this manual is not
followed exactly, a re or explosion may result causing
property damage, personal injury or loss of life.
— Do not store or use gasoline or other ammable va-
pors and liquids in the vicinity of this or any other
appliance.
— WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any
phone in your building.
•
Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the re
department.
—
Installation and service must be performed by a quali-
ed installer, service agency or the gas supplier.
WARNING: This appliance is equipped for natural and
propane gas. Field conversion is not permitted other than
between natural or propane gases.
Questions, problems, missing parts? Before returning to your retailer, call
our customer service department at 1-866-573-0674, 8:00 am - 4:30 pm CST,
Monday through Friday or email contact@usaprocom.com

Table of Contents

Questions and Answers

  • W
    William VincentSep 9, 2025
    Why does my Procom PCNSD18T Heater click after being lit?
    • K
      kimberly72Sep 9, 2025
      A clicking or ticking noise from your Procom heater just after the burner is lit or shut off is often due to the metal expanding while heating or contracting while cooling. This is common with most heaters. If the noise is excessive, contact a qualified service technician.
  • M
    Michael SimonSep 12, 2025
    Why is there white powder around my Procom PCNSD18T Heater?
    • K
      Katherine ThomasSep 12, 2025
      If you notice a white powder residue forming within the burner box or on nearby surfaces, it's likely due to the vapors from furniture polish, wax, carpet cleaners, etc., turning into a white powder when heated. To prevent this, turn off the heater when using such products.
  • A
    Angelica JohnsSep 13, 2025
    Why is my Procom Heater smoking on first use?
    • B
      Benjamin ArroyoSep 14, 2025
      If you notice a slight smoke or odor during the initial operation of your Procom heater, it's likely due to residues from the manufacturing process. This problem should stop after a few hours of operation.
  • L
    Laura LeeSep 16, 2025
    Why is there gas odor during Procom Heater combustion?
    • C
      Christopher DonaldsonSep 16, 2025
      If you smell gas during combustion with your Procom heater, it could be due to foreign matter between the control valve and burner; contact a qualified service technician to remove it. Alternatively, there may be a gas leak; locate and correct all leaks.

Procom PCNSD18T Specifications

General IconGeneral
BrandProcom
ModelPCNSD18T
CategoryHeater
LanguageEnglish

Related product manuals