EasyManua.ls Logo

Procon A1M - Page 56

Procon A1M
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
Electric Energy
0x0000 = 0.00 kWh
0x0001 = 0.01 kWh
0xFFFE = 655.34 kWh
0xFFFF = 655.35 kWh
††
MRC Prohibit command must NOT be written to Shizuoka designed models
#1
Value always read as 0 on CAHV/CRHV 2013 models
#2
Value always read as 0 on CAHV/CRHV 2013 models
#3
Value always read as 0 on CAHV/CRHV 2013 models
#4
Stop and Cooling modes not supported on CAHV 2013 models
#5
Stop, Cooling and Legionella modes not supported on CRHV 2013 models
#6
This value is read only on FTC4 models
#7
Bit 4 not supported on CAHV/CRHV 2013 models and EAHV 2015 models
#8
This setting is not supported on CAHV 2013 models
#9
Range is -30..+50ºC for CRHV/CAHV/EAHV models
#10
Range is 0..+50ºC for CRHV/CAHV/EAHV models
#11
Range is +30..+65ºC for CAHV models
#12
Range is +25..+65ºC for CRHV models
#13
For EAHV 2015 models the modes Stop, Hot Water, No-Voltage Contact and Legionella are unsupported
#14
For CAHV/CRHV 2013 models and EAHV 2015 models settings Emergency Run and Test Run are unsupported
#15
Range is +40..+90ºC for QAHV models
#16
Range is +30..+55ºC for EAHV models (Heating)
Range is +5..+25ºC for EAHV models (Cooling)
#17
“Error information of refrigerant system” for CAHV/CRHV/QAHV models
#18
Read only value

Related product manuals