Need help?Do you have a question about the PROEL SMART plus and is the answer not in the manual?
Basic precautions for electric product use, including reading instructions and protecting from hazards.
Illustrates various wiring diagrams for connecting speakers to mixers and amplifiers.
Controls and indicators for power (POWER ON), mains connection (MAINS AC), and protection status (ON/PROTECT).
Controls for signal input (INPUT/LINK), volume level (VOLUME), and signal/clip indicators (SIGNAL/CLIP).
Switches for phase (PHASE), crossover (160Hz/100Hz), filter/flat output (FILTER/FLAT), and stereo/mono setup (STEREO/MONO).
Technical data for SMT10P/SMTV10P passive and powered speakers, including impedance and power.
Technical data for SMT10A/SMTV10A powered speakers, including max power and input sensitivity.
Technical data for SMT12P4/P8/SMTV12P4/P8 speakers, including dimensions and weight.
Technical data for SMT12A/SMTV12A powered speakers, including continuous power and weight.
Technical data for SMT15P4/P8/SMTV15P4/P8 speakers, including sensitivity and SPL.
Technical data for SMT15A/SMTV15A powered speakers, including max power and weight.
Technical data for SMT153P4/P8/SMTV153P4/P8 speakers, including woofer and midrange drivers.
Technical data for SMT153A/SMTV153A powered speakers, including power and input sensitivity.
Technical data for SMT215P4/P8/SMTV215P4/P8 speakers, including woofer and compression driver.
To Next Page
General