Profitec GO - Machine Installation

ENGLISH
Translation of the original German user manual 23
3.2 Buttons and lights
1. Coffee button
2. Steam button
3. On/Off button
4. Orange control lamp for coffee
5. Orange control lamp for heating
6. Green control lamp to indicate ON/OFF
3.3 Technical data
Voltages :
Frequency :
EU: 230 V
EU: 50 Hz
UK: 230 V
UK: 50 Hz
NZ: 230 V
NZ: 50 Hz
AU: 230 V
AU: 50 Hz
US: 115 V
US: 60 Hz
JP: 100 V
JP: 50/ 60 Hz
Power: 1.300 W (EU, UK, NZ, AU), 900 W (US, JP)
Water tank: approx. 2.8 litres
Measurements: W 210 mm x D 338 mm x H 381 mm
Measurements with portafilter: W 210 mm x D 410 mm x H 381 mm
Weight: 13.0 kg
4 MACHINE INSTALLATION
4.1 Preparation for installation
• Place the machine on an even and stable surface.
• Ensure that the machine is on a water-resistant surface in case of water spillage or
leakage.
• Do not place the machine on hot surfaces.
4.2 Electrical connection
• Ensure that the local main voltage supply corresponds to the information given on the
type plate on the front panel of the espresso machine.
• Ensure that you use the correct power plug for your country.
• Plug the machine into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use a power extension cord or a multiple socket.
1
2
3
4
5
6