ENGLISH
Translation of the original German user manual 32
Follow the steps as indicated below:
1.
Brew group at the beginning.
2.
Remove the countersunk screw in
the middle of the brewing unit.
3.
Remove the shower screen and
the shower plate.
4.
Remove the thin gasket of the
shower tray.
5.
Now the group gasket can be
removed.
6.
Remove the group gasket with a
screwdriver.
7.
Clean the groove before inserting
the new group gasket.
8.
Insert the new group gasket with
the rounded side facing upwards.
9.
Re-insert the gasket and the
shower screen as seen in pict.4
and tighten them with the
countersunk screw.
The steam nozzle is blocked
Clean the holes of the steam nozzle carefully with a needle or similar.
For this purpose, the steam nozzle may also be unscrewed.
Replace the steam/ hot water nozzle.
To Next Page
Loading...
