EasyManua.ls Logo

Profitec Pro 800 - Machine Description; Machine Parts

Profitec Pro 800
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
Bedienungsanleitung/Instruction manual PRO800
19
before undertaking this measure.
For machines with water tank use, follow our descaling
instructions. This will protect your machine against expensive repairs.
An already calcified machine may only be descaled by your specialised dealer because a partial
disassembly of the boiler and the tubing may be necessary to prevent the system from being
blocked by lime residues. A late descaling can cause substantial damage to the machine.
2.2 Proper use
The PRO800 has to be used for the preparation of coffee, hot water and steam only. The machine is not
intended for commercial use.
Use of the machine other than for the above mentioned purpose is prohibited. The manufacturer cannot be
held responsible for damages due to unsuitable use of the machine and is not liable for recourse.
This appliance is intended to be used in household and similar applications such as:
staff kitchen areas in shops, offices and other working environments
farm houses
by clients in hotels, motels and other residential type environments
bed and breakfast type environments
3 MACHINE DESCRIPTION
3.1 Machine parts
PRO800
1. Brew lever
2. Cup warming tray, removeable
3. Steam dispenser
4. Steam wand
5. Green control lamp
6. On/off switch
7. Orange control lamp
8. Drip tray
9. Hot water dispenser
10. Hot water wand
11. Brew group
12. Porta filter
13. Boiler pressure gauge
14. PID-Display, not visible
15. Switch for watertank/water
connection direct, not visible
Caution!
Danger of injury: The following parts are hot or may become hot:
area around the steam handle and the hot water steam and hot water wands
portafilter
brew group
body (upper part and side frames)
1
4
2
3
5
6
7
8
10
9
11
12
14
15

Other manuals for Profitec Pro 800

Related product manuals