EasyManua.ls Logo

Profitec Pro 800 - Water Tank Operation; First Use; Initial Setup with Water Tank

Profitec Pro 800
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
Bedienungsanleitung/Instruction manual PRO800
25
There will be a slight hissing sound when the portafilter is removed.
If the coffee is ground too fine and no espresso flows from the porta filter, please never
unclamp the porta filter or use force to press back the lever handle. Always wait until
the lever handle has reached the neutral position again.
Wrong!
Correct!
Portafilter is inserted incorrectly Portafilter is inserted correctly
Wrong!
Correct!
Please leave enough distance between your face/body and the lever when brewing espresso.
Caution! When conducting a flush while the
portafilter is inserted, there is a danger of
injury. Hot water will spout from the
portafilter.
Caution!
If the lever has not reached the neutral position when removing the portafilter, coffee and hot
water will spout from the brew group. This may cause injury.
Only freshly ground coffee allows for an optimal coffee result. Therefore, use a
professional coffee grinder. In our assortment you will find a compact coffee grinder.
We recommend to use a stainless steel tamper with a diameter of 58 mm for optimum
tamping.
6.4 Dispensing of hot water
1 Place a suitable container (with heat-insulated grip) underneath the hot water wand. Now you can
dispense hot water (e.g. for tea). When dispensing large amounts of water, it is advisable to turn the
machine off so that no cold water is pumped out of the fresh water tank.
2 After having dispensed hot water, turn the machine back on. The boiler is automatically refilled with fresh
water.

Other manuals for Profitec Pro 800

Related product manuals