ProForm 505 CST User Manual

9
5. Attach the Right Upright (86) to the Base (97)
with a 3/8" x 2 3/8" Screw (3), a 3/8" x 1 1/4"
Screw (1), a 3/8" x 1 1/2" Screw (2), and three
3/8" Star Washers (11) as shown; do not fully
tighten the Screws yet.
Attach the Left Upright (not shown) as shown
in steps 4 and 5. Note: There are no wires on
the left side.
4. Set the Right Upright (86) on the Base (97) as
shown. Make sure not to pinch the Upright
Wire (88). Slide the Right Upright so that the
3/8" x 2 3/8" Screw (3) in the Base is inserted
into the slot (E) in the Right Upright; do not
fully tighten the Screw yet.
5
4
1
2
97
11
97
11
86
86
E
3
11
3
88

ProForm 505 CST Specifications

General

Speed Range	0-10 MPH
Incline Range	0-10%
Cushioning	ProShox Cushioning
Motor	2.5 HP
Tread Belt	20" x 55"
Workout Programs	18
Heart Rate Monitoring	EKG Grip Pulse
Folding Design	SpaceSaver Design
Display	5" Backlit Display