.
.
Slide the Brace (29) ontothe_threadedboltproh;ud-
ing frownthe Tower Frame (I0). Thread a '3/8",
Ny_ackNut (6} onto the thr_ded bolt. Do noelI_Qht.
en the Nvlack Nut yet.
Placeyour foot on the extensionand sligh_ m.ise
the front oFthe Tower Frame (10). _ign the Imver
end of the Brace (29) with the indicated 3/8" x "
2 1/2" Carriag_ BOlt(1). Lowerthe Tower Frameso
the Braceslidesonto the Carriage Bolt.Thre_cl a
3/8" Nut (2) with a 3/8" Lack'washer(3) onto the
Ca ageBolt.Do.o ,gh oNutyet.
With the help o.Fa secondperson, lift theUl_right(9)
and lower itonto the two indicated 3/8" x 2 1/2"
Carriage Bolts (.1)in the Real Base(8). Thread a
3/8" Nut (2) and 3/8" Lac_a'sher (3) ontoeach
Carriafle Bolt.Do not fi_hten the Nuts yet.
Altoch !he FrontBase(7}totheeUpright(9) with
"3/8" x 3/,_" Boltsr3111s_ th;.ins_tdrm.v[n_l. _"
'.tighten Ibe 3/8" N/lack Nut (6) attached in assem-
bly s_p 4: and the .spven3/8" Nuts (2) attached in
,assemblysteps 3 through 5.
.
Atta'ch the"Fo_t Plc_te-(102)to th_ Ul_ight" (9) _-_h
two 3/8" x 3/4__ Bolts (31) and 3/8" N_ock Nuts
(6).
i
With the help of q secondl_rs_n, lift t_ FrontBase
(7). Peehhe backi_"_lf th;;ee'Rub,berPads(48)." / °
Paresstwoonto the_ndemde of the FrontBosein the
|ndlcated Io_'afions, and one onto theundersde of
theUpnght (9). Lower the FrontBose." -/
Presstwo Rubber Pads 148| onto the R_r I_e (8)
in the some manner.
102
4
To Next Page
Loading...
Need help?
General
