12
HOW TO USE THE ELLIPTICAL
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the elliptical has been exposed to
cold temperatures, allow it to warm to room tem-
perature before plugging in the power adapter. If
y
ou do not do this, you may damage the console
displays or other electronic components.
Plug the power adapter
into the receptacle on
the frame of the ellipti-
cal. Then, plug the
power adapter into an
appropriate outlet that
is properly installed in
accordance with all
local codes and ordi-
nances.
HOW TO LEVEL THE ELLIPTICAL
If the elliptical rocks
slightly on your
floor during use,
turn one or both of
the leveling feet
beneath the front
and rear of the
frame until the
rocking motion is
eliminated.
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical, moving
it requires two persons. Stand in front of the ellipti-
cal, hold the upright, and place one foot against one of
t
he front wheels. Pull on the upright and have a sec-
ond person lift the track until the elliptical will roll on
the front wheels. Carefully move the elliptical to the
desired location, and then lower it to the floor.
Leveling
Foot
Power Adapter
Place
your foot
here
Pull on
upright
Lift here
To Next Page
Loading...
Need help?
General
