ProForm XP 160 - Warning Decal Placement; Decal Placement and Safety Warnings

TABLE OF CONTENTS
WARNING DECAL PLACEMENT ............................................................. 2
iMPORTANT PRECAUTIONS ................................................................ 3
BEFORE YOU BEGIN ...................................................................... 4
ASSEMBLY .............................................................................. 5
ADJUSTMENTS ........................................................................... 9
EXERCISE GUiDELiNES .................................................................. 10
ORDERING REPLACEMENT PARTS .................................................. Back Cover
FULL 90-DAY WARRANTY .......................................................... Back Cover
Note: A PART iDENTiFiCATiON CHART and a PART LIST/EXPLODED DRAWING are attached in the center of
this manual, Remove the PART iDENTiFiCATiON CHART and PART LIST/EXPLODED DRAWING before begin-
ning assembly,
WARNING DECAL PLACEMENT
The decal shown here has been
pJaced on the weight bench. If the
decaJ is missing or illegibJe, please
call toll-free 1-888-533-1333, Monday
through Friday, 8 a.m. until 8 p.m.
Mountain Time, and order a free
repJacement decal Apply the decal
in the location shown.
/
//
//
Misuse of this machine
may result in serious
injury.
• Read user's manual
prior to use and foUlow
aHwarnings and
instructions.
. Do not aibw children
on or around machine.
. Keep body, cbthing,
and hair free and clear
of aH moving parts.
Replace label if
damaged, i_legibb, or
removed.