ProForm XP StrideClimber 600 - How to Adjust the Selector; How to Level the Elliptical Exerciser

HOW TO ADJUST THE SELECTOR HOW TO LEVEL THE ELLIPTICAL EXERCISER
The pedals on the elliptical exerciser move your feet in
a natural elliptical path. You can adjust the selectors
on the elliptical exerciser so that the pedals move in a
more vertical path or a more horizontal path.
To adjust the elliptical exerciser so that the pedals
move in a more vertical path, pivot the two selectors
to the high position; to adjust the elliptical exerciser so
that the pedals move in a more horizontal path, pivot
the selectors to the low position. IMPORTANT: Make
sure to adjust both selectors to the same position.
If the elliptical
exerciser rocks
slightly on your
floor during
use, turn one or
both of the lev-
eling feet
beneath the
base until the
rocking motion
is eliminated.
Leveling
Feet
Selectors
14